100KW-215kWh Outdoor Cabinet Energy Storage System (Air-Cooled)
Detailed introduction
Huijue Group outdoor cabinet energy storage system integrates batteries, BMS, EMS, modular converters PCS, and a fire protection system in one cabinet. Such a design really ensures efficiency, shortens the time spent on installation, saves costs, and is mainly applied in different levels of power utilization. With a flexible modular design, it suits grid-tied and off-grid systems, peak shaving, and valley filling.
Application Scenarios
- Peak Shaving and Valley Filling: This aspect of demand response shifts the load to reduce the cost of electricity through discharging at peak hours.
- Power Stability: It’s a plus for better grid reliability due to the intermittency of renewable energy sources.
- Backup Power: You can count on it when the grid is down.
- Energy Arbitrage: Energy can be stored when demand is low, with the intent to then make money off it during variable electricity rates.
- Renewable Energy Optimization: This optimizes daytime solar usage and banks excess energy produced during the day for consumption at night.
- Grid Investment Reduction: Reduces the upfront investment cost of the grid for construction in systems of distributed power.
Product Features
- Fast Power Response: The product can support virtual power plants and grid-connected/off-grid mode.
- Integrated Design: The integrated design minimizes transport cost and installation cost.
- Intelligent Monitoring: Data collection is realized locally, operation and maintenance remotely, and labor costs are reduced by 70%.
- Scalability: Modular parallel connection is capable and capacity expansion is easy.
- High Efficiency: No isolation design reduces power loss and improves the efficiency of the system.
- Six-Layer Security: Multi-level protection with fault indication integration can be provided.
- Remote Upgrade: Support for both local and remote upgrades is available with broadcast. It increases upgrade efficiency by 90%.
| Product model: HJ-ESS-215A (100KW/215KWh) | |||
|---|---|---|---|
| DC parameters | AC parameters | ||
| Battery Type | Lithium Iron Phosphate | AC side rated power | 100KW |
| Cell capacity | 3.2V/280Ah | Maximum power on AC side | 110KW |
| System battery configuration | 1P240S | Cable total harmonic distortion rate | <3% of rated power |
| Battery rated capacity | 215kWh | AC side rated voltage | 380VAC |
| Battery voltage range | DC636-876V | Communication access method | 3P+N+PE |
| Charge and discharge rate | 0.5C | Rated grid frequency | 50/60Hz |
| Discharge depth | 80% | Power factor range | 0.98 |
| Battery cooling method | air cooling | Off-grid operation | support |
| System parameters | |||
| Size | 1600*1280*2200mm(reference) | Temperature control method | Industrial grade temperature controlled air conditioner |
| Protection level | IP55 | fire protection plan | Aerosol, perfluorohexanone |
| System communication protocol | Standard: Modbus | Communication Interface | RS485, RJ45 |